Neutrik - NO2-4FD

OpticalCON Chassis Connector.

Features & Benefits

• Suggested OEM equipment connector due to LC front compatibility
• Designed as feedthrough with automatic sealing shutter
• Shutter with silicone gasket protects optical connection from dust and dirt
• Suitable for indoor (studio) camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage
• Accommodates standard LC connectors on the rear for simple installation
• Connection on the front side either by rugged opticalCON or standard LC connector
• The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations
• IP65 ingress protection in mated condition with SCDP-*
• Color coding with SCDP-* according to ANSI/TIA-568.3-D Standard: Multimode - black, Single mode PC - blue, Single mode APC - green

Product

• Title NO2-4F
• Gender F.

Electrical

• Contact resistance < 7 mohm
• Dielectric strength 1,5 kV_DC
• Insulation resistance > 2 Gohm (initial)
• Rated current per contact 6 A
• Rated voltage < 50 V (1)
• Ground contact Faston 2.8 x 0.5 (soldering possible)

Mechanical

• Insertion force < 45 N
• Withdrawal force < 45 N
• Lifetime > 5000 mating cycles
• Locking force 1000 N
• Wiresize
• Locking device Push-Pull
• Mounting direction Front mounting
• Chassis shape D

Material

• Contacts Bronze (CuSn6)
• Insert Polyamide (PA 6, PBT 30 % GR, PBT 50 % GR)
• Shell Zinc diecast (ZnAl4Cu1)
• Shell plating Nickel
• Split sleeve ceramics

Environmental

• Temperature range -40 °C to +75 °C

Optical

• Insertion loss < 0.4 dB / connection
• Optical connector LC-Duplex Feedthrough